 |
|
 |
| - | |
| Direction of Rotation - Viewed from Motor End |
Clockwise |
Driver Rating |
230/460 Volt. 2 Phase, 60 Cycle, NEMA C Flange. 143TCZ Frame, Dean Standard Motors, 304SS Shaft with standard shaft extension for jet motor, NEMA T3B temperature rating for Ex. Pr. motors, which are Class 1, Troup D; Class II, Groups F&G. |
Horsepower Rating |
1/2HP 1,11/2 and 2 HP |
| Flanges A.N.S.I. Rating |
Class 125 C.I., Class 150 316SS |
| Impeller |
Single Plane Spin Balance |
| Maximum Working Pressure | 100 PSIG |
| Maximum Suction Pressure |
Any Part of Working Pressure |
| Hydrostatic Test Pressure | 150 PSIG C.I. and 200 PSIG 316SS |
| Pumping Temperature - Minimum - Maximum |
Minus 20°F C.I. and 316SS 220°F C.I. and 316SS |
| Stuffing Box | Integral Mechanical Seal Only, Internal Seal Face Flushing All Pumps |
| Corrosion Allowance | 1/8 inch |
Mechanical Seal Specifications
Suction Pressure |
Temperature |
||||
Pump Material Class |
Mechanical Seal |
Max |
Min |
Min. |
Max. |
20 or 50 |
Dean Type 6A, 6C or 9A |
100 PSIG |
2 PSIA |
220°F |
-20°F |
Standard Materials of Construction
Part |
Part No. |
Iron (Class 20) |
316SS (Class 50) |
Impeller
|
3
|
C.I. |
316SS (3) |
Casing |
5 |
C.I. |
316SS (3) |
Casing Cap Screw |
5D |
ASTM A307 Steel |
|
Adapter Cradle |
7 |
C.I. |
|
Adapter Cap Screw |
7G |
ASTM A307 Steel |
|
Casing Back Cover |
22 |
C.I. |
316SS |
Clearance Shim |
37 |
Plastic |
|
Casing Gasket |
77 |
Aramid Fiber |
|
Stationary Seal Element Stationary Face Spring Holder Shaft Packing |
95A |
Carbon 304SS Viton |
Carbon 316SS 316SS Teflon |
Rotating Seal Face |
95B |
Ceramic |
|
Seal Dowel Pin |
375 |
Not Required
|
316SS |
Options
External Flush: When specified, the seal chamber can be supplied with an external flush instead of
the standard internal flush.
Seal Chamber: In addition to our standard seals, the 6C seal is available for caustic service. It is composed of 304SS metal parts, high aluminum ceramic vs. carbon mating faces, and a viton bellows.
Previous Page
